We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Imagine leaving for a business trip to attend a major meeting. You have enough time to clear security and board the plane, and the flight attendant assures you that everything is on time. Small victories such as these make everyone happy. Carbide Bush

However, soon after the passengers boarded the plane, there is a foul odor, and it was reasoned that it must be from the plane resting and that it would get better after take-off. However, the odor lasted the entire flight, and several passengers reported it. Everyone applauds when the plane touches down and immediately takes to social media to spread the word about the problem.

In this scenario, the return flight was switched to a different airline. However, the rancid odor is likely recalled each time the passengers think of the airline, and the airline could be consciously avoided in the future.

This is an extreme example, but smell and memory are inextricably linked. While the scenario is made up, the issue was real for a modern airline. An aircraft had a major sealing issue: the carbon-face seal in the auxiliary power unit was leaking regularly, causing cabin odor.

To save money, the airline initially chose to deal with a competitor of Technetics. The competitor’s seal, however, did not solve the problem and the airline decided to use Technetics, with its unrivaled dependability and quality.

In this article, Technetics describes its rigorous and thorough solution process—collaboration, design, analysis, and testing—to demonstrate how the solutions deliver the first time, every time.

Technetics focuses on forming and maintaining customer trust by working directly and intimately with them throughout the process. While searching for the best solution to meet their needs, Technetics remains open, honest, and communicative.

Using the design specs provided, Technetics gathers additional information to accomplish a preliminary design, compliance matrix, and schedule. The compliance matrix pinpoints all requirements and how they will be validated, while the plan negates high-risk design requirements.

Technetics maintains open lines of communication throughout the design process. The rigid adherence to the schedule ensures that the necessary resources are allocated appropriately.

The thorough analysis ensures that the customers always get the best results.

Technetics begins by examining the surrounding components, such as operating environments, materials, configuration, and assembly. They can anticipate distortion effects, vibration, and seal face loads using the FEA tool to review seal components.

Based on the analysis results, Technetics may recommend using a metal bellows as a secondary seal to provide a spring force to keep the sealing faces closed during the shutdown. This design aids in stress analysis. Additional testing may be carried out as needed to ensure the design specifications are met.

The company decides whether a contacting or non-contacting seal design is best. They use hydrodynamic face seal designs for non-contacting seals in high-speed applications that require a low-pressure differential, such as sealing small main shaft locations. The company includes predictions for lift-off speed and high-altitude conditions during this analysis stage. Other factors, such as film thickness and stiffness, are also considered.

Flatness is a critical component of good hydrodynamic performance. Technetics also looks into rotor deflection by ensuring the face seal designs are flat and lubricated while dealing with deflections.

The engineers will conduct a leakage and seal life analysis. While lubrication film is required to keep the interface cool and maintain the face temperature, it also allows for unwanted leakage. This step was vital in this airline’s case because leakage could lead to the failure of the solution. On the other hand, the design toolkit can predict leakage rate and heat generation, which helps estimate seal life.

The production and validation phases begin after the prototyping phase and they begin building parts. This includes weighing the face load against the drum loading and performing a vacuum test to determine the quality of the secondary seal.

Four dynamic test rigs are used to simulate the quality of the solution for the customer’s specific scenario, such as outburning pressures, speeds, and temperature conditions. The company repeats the leak rate, wear, and face pressure testing.

Technetics used the bellows energized hydrodynamic lift-off seal for this airline customer. The seal worked flawlessly, and the customer’s air cabin odor problem is now resolved. Technetics found a solution the first time because they used the tools and processes described above.

Technetics continues to invest in the industry’s demanding requirements and ensure that every expectation is met with its robust and thorough quality system. The solution process, as described above, combined with the company's fully integrated business software designed specifically for manufacturing and hiring top talent, are just a few reasons it leads the industry in quality and satisfaction.

This information has been sourced, reviewed and adapted from materials provided by Technetics Group.

For more information on this source, please visit Technetics Group.

Please use one of the following formats to cite this article in your essay, paper or report:

Technetics Group. (2023, February 08). Case Study: APU Mechanical Seals Problem. AZoM. Retrieved on March 04, 2023 from https://www.azom.com/article.aspx?ArticleID=22392.

Technetics Group. "Case Study: APU Mechanical Seals Problem". AZoM. 04 March 2023. <https://www.azom.com/article.aspx?ArticleID=22392>.

Technetics Group. "Case Study: APU Mechanical Seals Problem". AZoM. https://www.azom.com/article.aspx?ArticleID=22392. (accessed March 04, 2023).

Technetics Group. 2023. Case Study: APU Mechanical Seals Problem. AZoM, viewed 04 March 2023, https://www.azom.com/article.aspx?ArticleID=22392.

Do you have a question you'd like to ask regarding this article?

AZoM talks with Francis Wang, CEO of NanoGraf, to discuss their new lithium-ion battery technology and the onshoring of production in the Midwest.

AZoM spoke with Dr. Katharina Marquardt ahead of the 2023 International Day of Women and Girls in Science. We discuss her impressive career in STEM, spanning her expertise in subjects from mineralogy to ceramic materials.

This International Day of Women and Girls in Science, AZoM talks with Dr. Debrupa Lahiri, an associate professor in the Department of Metallurgical and Materials Engineering at IIT Roorkee, about her research and career in STEM.

This product profile from Microtrac outlines the high-end adsorption capabilities of the Belsorp Max X.

The APEX 400 is a dedicated solution for manual preparation of pressed pellets for XRF analysis. It is capable of pressing samples in supporting steel rings as well as in the standard unsupported format.

Find out more about how to run the lab more efficiently with access to all laboratory information using commercial web browser LabVantage 8.8.

AZoM.com - An AZoNetwork Site

Tungten Carbide Nozzle Owned and operated by AZoNetwork, © 2000-2023